THP/UT

LOWER IS NOT POSSIBLE

When the lowest loading height is required for the highest demands, the THP/UT is there for the job. This makes the transport of particularly high loads simply child's play. Due to the wide range of accessories which are available, the THP/UT can be ideally adapted to the conditions of the transport route.

SEND REQUEST NOW!

Your benefits
  • Extremely low loading height
  • For very high loads
  • Alternative tires
  • Customized loading height
  • Alternative basic width of 2,750 mm
  • Best maneuverability even in narrow passages

Technical features

+   Twin tires   205/65 R 17.5 [1] [2]
215/75 R 17.5 [1] [2]
+   Axle load   25 t at 20 km/h [1] [2]
+   Dead weight (4-axles)   11.5 t
+   Axle stroke   600 mm
+   Vehicle width   2,750 mm [1] / 3,000 mm [2]
+   Axle spacing   1,500 mm
+   Max. steering angle   ± 60°
+   Number of axles   2-6
 
[1] 2,750 mm vehicle width
[2] 3,000 mm vehicle width

Accessories and options

General accessories

+

 

Hydraulic power pack
Hatz 10 kW / 13.6 PS
Kohler 17.9 kW / 24.3 PS

 
+   Operation panel  
+   Cable remote control  

+

  Radio remote control  
 
Towing equipment
+   Swivel arm for single widths  
+   Center towing device for parallel combination (1+1/2)  
+   Center towing device for parallel combination (1+1)  
+   Drawbar 2 m, 3 m and 5 m  
 
Gooseneck

+

  Combination gooseneck 35 t  

+

  Universal gooseneck 35 t, 45 t and 52 t  
 
Turntable
+   100 t / 200 t [1]  
+   300 t / 400 t [1]  
 
Flatbed deck
+   Construction height 250 mm / 300 mm  
+   Length 7,000-12,000 mm [2]  
+   With / without coupling point, overrideable / non-overrideable  
 
Vessel deck
+   Construction height 450 mm, 500 mm or 650 mm  

+

  Length 7,000-13,000 mm [2]  
+   Width 3,000-6,000 mm  
+   Fixed or extendable  
 
Excavator deck
+   Construction height 350 mm, 450 mm or 500 mm  
+   Length 7,000-13,000 mm [2]  
+   Fixed or extendable  
 
Intermediate deck
+   Length 3,000 mm-9,000 mm  
 
Tower adapter
+   RA 2  
+   RA 3  
+   RA 4  
 
[1] Capacity per turntable
[2] Special lengths from 3,000-15,000 mm on request

Downloads

Extremely low
loading height
Different vehicle
widths
High bending
torque

THP/UT in action