STZ-L | »MPA« with wheel recess

FLEXIBILITY IS WHAT COUNTS

Our forced-steered wheel recessed vehicles are flexible workhorses in which you can individually utilize the loading area to also transport high loads with low overall heights. Extensive accessories and options round off the product range for these application-oriented and powerful helpers for everyday transport duties.

SEND REQUEST NOW!

Your benefits
  • Varied application possibilities for the most different loads 
  • Increased flexibility in action

 

  • Lon excavator trough deck and low wheel recesses
  • Lowest loading heights to fulfill the most stringent height guidelines

 

  • Intelligent system for covering the recesses
  • Reduced set-up time for the most varied loads

Technical features

+   Axle load
(depending on countryrelated regulations)
(technical)
 
10-12 t at 80 km/h
15.6 t at 20 km/h
+   Loading height
STZ-L
»MPA«
 
785 mm / 965 mm*
785 mm
+   Axle stroke
STZ-L
»MPA«
 
200 mm
350 mm
+   Max. steering angle
STZ-L
»MPA«
 
45°
60°
+   Tires
(only for STZ-L)
  245/70 R 17.5
205/70 R 17.5
+   Vehicle width   2,550 mm / 2,750 mm
+   Axle spacing   1,360 mm
+   Surface platform refinement   Durability ensured with high-quality finish with zinc-dust base coat
 

Gooseneck

+

  Fifth wheel load   20-26 t

+

  Swing clearance radius   2,100-2,800 mm
+   Fixed
+   Outside position beams
 
Bogie with wheel recess
+   Width excavator trough**
STZ-L
»MPA«
 
674 mm / 874 mm
604 mm / 804 mm
+   Number of axles   3-5
 
*Depending on tires
**Depending on vehicle width

Accessoires and options

General accessories

+

 

Knorr “TIM” / Wabco “Smartboard”

 
+   “easyCONTROL” remote steering  
+   »SmartControl«  

+

  Wide load marker boards  

+

  Storage boxes under the loading platform  
+   Working lights  
+   Lift axle  
 
Gooseneck

+

 

Spare wheel carrier

 

+

 

High front wall

 

+

  Sidewalls  
+   Premium tool box  
+   Loading ramp  
+   Cable winch  
+   Stowage aids for accessories  
+   Electrohydraulic or diesel power pack  
 
Loading platform

+

 

Long material trestle, stake pocket strip

 
+   Outriggers  

+

 

Threaded bushes

 
+   Load-securing trestle  
+   Excavator crawler deck  
+   Sliding table  
+   Insertable wheel recesses  
   
Rear  
+   Various rear designs, suspension rail  
+   Hydraulic ramp sideshift  
+   Climbing pads  
+   Mechanical / hydraulic landing legs  
+   Detachable ramps  
+   Ramps in a variety of widths, lengths and flooring options  

Downloads

Flexible use of the
loading platform
Simple operation
Practical
lashing concept

STZ-L | »MPA« with wheel recess in action